If you use Jabra Elite 65t earbuds, chances are that at some point in time – whether out of the box or during usage – you will experience an issue with sound only coming from one side. Don’t worry; many potential causes and solutions for this aggravating ordeal exist. To get your listening pleasure back to full power. Take advantage of expert advice on what could be causing it and how best to resolve the problem quickly and easily.
Why is my Left Earbud Not Working?
There may be several causes behind that broken left earbud. Here are some explanations.
Faulty Bluetooth Connection
If you use the Jabra Elite 65t earbuds with a Bluetooth device, ensure their connection is solid and secure. A weak or unstable connection may cause sound to only come out of one ear or none.
Defective Hardware
If the left part of your earbud is not working, it could be because of a defective component within the device itself, such as a speaker driver or other electrical connection. In this, you may need to get your earbuds replaced.
Software Issue
If you are using the Jabra Elite 65t earbuds with an app or device, it is possible that your left part is not working because of a software bug or other glitch. In this, update the relevant apps and devices to fix any issues.
Faulty Wiring
Your Jabra Elite 65t earbuds’ sound, may perform differently than intended because of bad wiring. Check the cords that are not broken or frayed, as this could be causing issues with your left part.
Troubleshooting
Unlock the potential of your earbuds with this simple fix.
- Peel back the rubber cover and check if there is any dirt or adhesive between the two magnets- careful not to use harsh chemicals when cleaning.
- Take a cotton swab and wipe away anything sticking, then pop on the cover again before hooking up to charge.
- When it reaches the battery, disconnect from the power source, remove the buds and try listening. You should be rewarded, with sound coming out of both left & right bud.
Check the Settings
The next step is to check the audio settings. Ensure that the left and proper channels are set correctly and that both earbuds receive an equal sound. You can also check that your volume settings are high enough for optimal performance.
Connectivity Issues
If you are experiencing connectivity issues, that your earbuds are near the device they are connected to and that both devices have sufficient battery life remaining. Additionally, try resetting your Bluetooth connection by turning off the Bluetooth on your device and then turning it back on again.
Poor Audio Excellence
If you are experiencing poor audio quality, make sure that the audio files are playing and are of a high enough quality. You can check to see if any dust or debris is blocking the sound outlets on your earbuds or if the wires are bent or damaged. You should also ensure that your audio settings are configured and set to an appropriate volume level for your earbuds.
Inability to Make Calls
If you are having trouble making calls with your wireless earbuds, your device has a connection to your cellular network. Additionally, try removing the earbuds from your device and reconnecting them again to ensure a secure connection. If the issue persists, you may need to reset your wireless earbuds or contact your wireless service provider for further assistance.
Intermittent Audio
If you are experiencing intermittent audio when using your earbuds, try adjusting the volume on your device or checking that the Bluetooth settings are appropriately configured. You should also check the battery level of your earbuds are charged.
Clean your Eardrum
Dirty eardrums can cause audio issues with your wireless earbuds. Try cleaning the eardrum of each earpiece to ensure it is free from dirt and debris that might be blocking or distorting the sound.
Low Volume
Try increasing the volume on your device or checking the in-app settings for your audio player, If you are having trouble hearing sound through your wireless earbuds. Additionally, if you are not using any sound equalizers or other sound processing software on your device, that could limit the volume of your wireless earbuds.
Avoid Interference
Wireless earbuds can be susceptible to interference from other electronic devices and signal sources. Avoid using your wireless earbuds near electronic devices such as microwaves and cell phones to ensure optimal sound quality. Try to keep them away from sources of interference like power lines.
Replace Batteries
If you still have issues with sound quality, replace the batteries in your wireless earbuds. Many earbuds require regular battery replacements to maintain optimal sound quality.
Charge your Eardrum
These earbuds come with a charging case that stores and charges the earbuds while not in use. If your sound quality decreases, it might be time to charge your eardrum. With proper care, your earbuds should last a long time.
How to Recharge?
Forget low-battery blues! Recharge your Jabra Elite 65t wireless earbuds: pop them into the charging and connect to a power source for up to two hours—even just 20 minutes of charge will give you one hour of use. Then, activate pairing mode and Bluetooth on your device to ensure that both buds are close together, and then enjoy uninterrupted music or calls without worry. Get ready to hear what has been missing from all other listening experiences.
Is the Charging Case Storing the Charge?
Check to see if your Jabra Elite 65t charging case is retaining power before you let a defective earbud get you down. If only one of the two buds is functioning, it may indicate that electricity is not being distributed equally to them.
Reset Eardrum
Resetting your Jabra Elite 65t earphones may be the best option if all else fails.
- Take off your Jabra 65t earphones.
- Press and hold the multipurpose button for three seconds or until you see the LED flash red to reset them.
- Press the same button for three more seconds after a brief break to see an emerald color flash instead.
- You’ve successfully finished a factory reset! Now hook up your phone to check their loudness.
Factory Reset
Are your Jabra 65t earphones in need of a new start? A safe method to delete all previously associated devices and establish new connections is to do a factory reset. Remove them from their charging case first. Next, hold down both buttons firmly for 10 seconds or until they begin to flash purple. Bluetooth must be turned off, followed by a few minutes of re-activation (drivers may need some time). Last but not least, go into device settings and remove those tinier helpers from saved data so that there won’t be any interference when you search again in the list of accessible devices. After doing all this, relax and take in the music as it runs through each bud.
Firmware Updates
With the free firmware update function, you can keep your earbuds current. The performance, audio quality, battery life, and connectivity may all be improved with firmware upgrades, which are published regularly. Download the most recent firmware from the website or the Jabra Sound+ app, which is available for iOS and Android smartphones. A Wi-Fi connection is required for firmware updates.
It could be a good idea to get in touch with the customer support team if none of these measures have been successful. They should help you get your earbuds operating once more and offer you more technical support.
Get a new pair of Jabra Elite 65t earbuds. It could be worthwhile if the two-year warranty covers your Jabra’s. If you still need to, you can get another set from Jabra or any other retailer that carries them.
Conclusion
Jabra is one of the brands that are best known for producing audio gear and accessories. Users like their products because of their high quality and dependability. A device will occasionally experience issues that initially seem strange but that, with the right approach, can be easily fixed.
We hope you found this helpful solution and were able to repair your earbuds again. If you enjoyed it, kindly spread the word to your friends.